新西兰 认证流程 Telepermit.docx

新西兰认证 Telepermit 申请流程; 1. Contact and send a sample of your product to a Recognised Testing Authority for testing. 2. Compliance Testing of your product sample is started by the testing authority using the relevant PTC Specification.Test results are sent once testing is completed. 3. Upon receipt of the full test results, complete the formal Telepermit application and forward to Telecom New Zealands Access Standards Team with other documentation as per the application form. 4. Once all necessary items and documentation has been received, your Telepermit application will enter the processing queue. 5. Test reports are assessed by the Access Standards Team to determine if your product meets the specified standards and all other requirements. 6. When your product complies with all the requirements, Congratulations! your product is now certified and granted a Telepermit. 7. Telepermit label with the unique Telepermit number is issued. See more information about Telepermit labels. 2.所需要资料 产品说明书 规格书 样机一套 安规报告 EMC报告 3.时间 3－4 周 Labelling A condition of a Telepermit is that the equipment displays a Telepermit Label. This label indicates the product has been certified and is suitable for connection to the Telecom New Zealand network and is usually located on the back or the bottom of the product. If the product does not display a Telepermit label then the product does not have a Telepermit. A separate Telepermit number and label is issued for each product and for each party holding a Telepermit for the same product. The product name is clearly shown on the label so the purchaser can see the label details match up with the product. The Telepermit number found on the bottom of the label consists of three parts: ?The first part is a three digit number which identifies the product category. e.g. 202 is for telephones. ?The second part is the last two digits of the year when the Telepermit was granted. ?The third part is a sequential number that shows the product for tha