新型四点接触球轴承的研制.pdfVIP

摘要 II 万方数据 ABSTRACT ABSTRACT Bearing is a kind of important modern machinery and equipment parts and components, As one of the common kind of bearing in the rolling bearing, deep groove ball bearing ’s outer ring raceway curvature radius is slightly greater than the ball radius, It mainly bears radial load the smaller axial load. In order to make the normal deep groove ball bearings in the working process move more more smoothly, and can withstand the bigger radial and axial load, the section shape of deep groove ball bearing inner and outer ring raceway must do some change, altering the semicircle shape to the elliptic, which could make the contact between the ball the inside and outside the circle of the race from a single point to two, and the contact point to the center of the ball with the center section of bearing from a center contact angle, which could make it bear larger radial load, and also could absorb a certain amount of axial load. After ball bearing raceway section changing, the contact between each ball and the the inner and outer raceway into four, and this is different from the structure of the disc four-point bearing (which mainly bear axial force) . In this paper, a new type of four-point contact ball bearing is called. Based on the novel four-point contact ball bearing as the main research object, first of all, its oval groove machining process is analyzed, and then the geometry rel