风能转换系统最佳叶尖速比控制算法设计论文.doc

. 摘 要 风力发电是一种清洁能源，通过对风能的利用有利于优化未来的能源利用模式。本文介绍了风能转换系统最佳叶尖速比控制算法设计，主要目的是实现风力发电系统的最大功率点跟踪。 论文的开始介绍了国内外风力发电的概况，为本文奠定了写作背景。接着文章阐述了风力发电系统的基本原理，着重介绍了风力机的结构与组成和贝茨理论，这是本文的基础。紧接着，文章分析了最大功率点跟踪控制算法的基本原理，以及最佳叶尖速比控制的特点，为控制系统的设计做好了准备。然后针对最佳叶尖速比控制定步长算法的特点，设计出了相应的控制算法和PI控制器，通过选取合适的PI参数，得到了较为理想的追踪效果，从而实现控制所要求的目标。最后就是本文的重点，Matlab环境下的仿真。首先我建立了风力发电系统的仿真模型，然后在Matlab环境下实现了最佳叶尖速比控制算法并对控制算法仿真结果进行了分析。 总之，通过分别对风力发电系统的设计和仿真，实现了对风能转换系统最佳叶尖速比控制算法设计。 关键词：风能转换系统；叶尖速比；最大功率点跟踪；PI控制器 PAGE . Abstract Abstract Wind power is a kind of clean energy, through use of wind energy is beneficial to optimize the mode of energy use in the future. This paper introduces the wind energy conversion system optimal tip speed ratio control algorithm is designed, main purpose is to achieve maximum power point tracking of wind power system . The beginning of the paper introduces the general situation of wind power at home and abroad, laid the writing background for this article. Then the article expounds the basic principle of wind power generation system, emphatically introduces the structure and composition and Bates theory of wind turbine, which is the basis of this article. Then, this paper analyzes the basic principle of the maximum power point tracking control algorithm, and the characteristics of the optimal tip speed ratio control, ready for the design of control system. Then aiming at optimal tip speed ratio control characteristics of fixed step length algorithm, designed the corresponding control algorithm and PI controller, by choosing the right PI parameters, obtained the ideal track effect, so as to realize the goal of control required. The last is the focus of this article, the simulation of Matlab environment. First, I established the simulation model of wind power system, and then realized in Matlab environment the optimal tip speed ratio control algorithm and the control algorithm simulation results are analyzed. In a word, through the design and simulation of wind power generation system, imple