基于DM6467T平台的智能相机双核通信技术研究-光学工程专业论文.docxVIP

华中科技大学硕士学位论文 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract Smart camera system is an integration of image acquisition, processing and display, that it can provide multi-functional, modular, high-performance and widely applicable machine vision solutions. With the increasing demand of industrial test, higher and higher demands are being put forward on the processing power and applications of smart camera system. Smart camera systems realization on the platform of DaVinci multiple processors have characteristics such as high performance and long software development cycle. Taking into these characteristics, this paper studies the dual-core underlying communication mechanism, and analyzes the usage and optimization of dual-core shared memory and codec-engine engineering structures. The DM6467T multimedia processor is consist of ARM, DSP, and abundant peripheral resources. While ARM is used as the general processor to realize peripheral control, interactive interface control, network communication and tasks like those, DSP is used specially for conducting complicated digital signal processing algorithm. With the thesis centering on the DM6467T platform, this paper proposes a DaVinci dual-core processor communication solution for the smart camera system on the basis of analyzing the hardware structures of the processor in the first, and then respectively puts forward three other solutions. One is the realization of memory resource acesss and sharing between ARM and DSP through CMEM. The second is the analysis and optimization for underlying communication of the two processors which is through DSPLINK. The third is the method of packaging DSP algorithm using xDAIS algorithm standard, and based on this, putting forward the process of smart camera system software development through CE framework. Finally, this paper proves the feasibility, stability and efficicence of the dual-core communication mechanism by the test of applying the face detection algorithm in the system. Key word