基于OPC技术的通信协议转换平台的设计与实现-计算机技术专业论文.docxVIP

摘要 本文主要介绍了基于 OPC 的 DCS 系统通信协议转换平台的研究与开发，该 系统可广泛应用于 DCS(分布式控制系统)与第三方设备或应用系统之间的数据交 换。作者在工作中对目前 DCS 与第三方设备的通信方式进行了深入研究，在分析 工程实际需要以及高度抽象各种通信方式和协议的基础上，提出该软件的详细需 求和设计思路，以实现 DCS 通过 OPC 的方式与非 OPC 协议设备的通信功能。 为此，作者详细研究了面向对象的设计思想和 OPC 数据访问规范，分析了目前和 利时 MACSV 系统与第三方设备通信的弊端以及未来设备通信的发展方向，得出 了该软件的具体设计方案。最后，利用面向对象思想，使用 VC++开发设计了基于 OPC 的通信协议转换平台，它具有灵活组态的功能，极大降低现场调试人员的工 作难度，可以同时连接多种支持不同协议类型的设备，并且可以兼容任何第三方 OPC Client，对于支持 OPC Client 的 HMI/SCADA、RMIS、MES 等应用系统可 实现即插即用。 关键词：OPC 组件对象模型 DCS 协议转换 Abstract The DCS system based on OPCs research and development platform, communication protocol conversion is introduced in the thesis.. The system can be widely used in DCS (distributed control system) and third-party equipment or data exchange between applications. In the work of DCS with third-party devices on the current means of communication in-depth study and analysis of the actual needs of the highly abstract works of various communication methods and protocols, based on the proposed detailed requirements of the software and design ideas, in order to achieve DCS By way of non-OPC OPC device communications protocol. So, a detailed study of object-oriented design and OPC data access specification, and benefit analysis of the current system when MACSV disadvantages of communication with third-party devices and the future direction of development of communications equipment, obtained the specific design of the software Program. Finally, the use of object-oriented thinking, the use of VC + + development and design of the OPC-based platform for communication protocol conversion,Its flexible configuration, greatly reduce the difficulty of the work site commissioning personnel can simultaneously connect a variety of types of devices to support different protocols. And can be compatible with any third party OPC Client, OPC Client for the support of the HMI / SCADA, RMIS, MES and other applications can plug and play Keywords: OPC COM DCS Communication Server 目录 目录 第一章 绪论 1 1.1 课题来源和研究背景 1 1.2 国内外研