基于52单片机的闹钟C语言分析.docxVIP

基于52单片机的闹钟C语言分析 The system is composed mainly of AT89C51 single chip machine and digital tube and keypad, and realizes the function of clock display and fixed alarm. Users can change the clock by pressing the button to check the alarm clock? Because the system USES a digital tube as a display, it is more convenient to view time at night? In addition, the system can set up a maximum of 10 time periods, which is a function of the average alarm clock. Keywords: single chip, alarm clock, digital tube The choice and argument of the plan According to the requirements of the subject, the main parts of the system include the following parts: 1, the button Seenario 1:4 * 4 matrix keyboards? If this option is chosen, it is easy and easy to enter from the keyboard when modifying the clock or setting the alarm clock, but the program is more complex. Solution 2: freestanding buttons? If too many buttons are set, more I/O will be used, and the wiring will be inconvenienced, so the solution applies to fewer buttons? Less if you choose this plan, because the buttons, in modification time or set the alarm time cannot enter directly, can only be done by plus or minus, a little trouble some, but the program is simple? Since there is no need to modify the time and set the alarm time, and the program is simple, the buttons are low and the cost is low, so choose plan two. 2, display Solution 1: LCD display. If this option is chosen, it will reduce the power consumption of the system so that it can be powered by batteries and portable? But the power circuit of the LCDS is complex and difficult to use? Scenario 2: use a digital tube as a display. The power circuit of the digital tube is simple, easy to use, and if you choose this option, you don，t need to have a light source at night, which is very convenient? The disadvantages are the power consumption. Since the use of the digital tube is convenient, it is also convenient to watch at night, so we chose plan two. timings If the clock chi