基于刚柔耦合模型的50t船用起重机动力学分析-机械设计及理论专业论文.docxVIP

江苏科技大学工学硕士学位论文 江苏科技大学工学硕士学位论文 Ab Abstract 万方数据 万方数据 万方数据 万方数据 II Abstract Hoisting machinery as an important branch of mechanical engineering, the study of the structure design method, often reflects the development level of the whole construction machinery industry. Considering the complexity of hoisting machinery structure, the traditional design method has gradually cannot meet the requirements of modern technology. To reasonable design can directly relates to the crane crane safety performance, efficiency and economy, etc. At present, the domestic study of crane, under different working conditions, using finite element analysis software to complete the statics analysis and modal analysis, and some researchers on crane transient dynamics analysis and harmonic response analysis, however, the coupled dynamics simulation analysis was carried out on the crane is relatively small. Using the ADAMS software to dynamic analysis can effectively analyze crane dynamic performance. This article is based on the prototype of 50t Marine crane design, and by using finite element analysis software ANSYS, the three-dimensional modeling software UG and the dynamics analytical software ADAMS of mechanical system of crane related analysis. In this paper, first of all, the research status of arm crane and the use of virtual prototype technology to do a brief summary, the basis of the research provides a beneficial study for and the basis. Marine to 50t crane to perfect the coupled modeling, modal neutral file generated b y ANSYS for stress influence bigger boom has carried on the flexible modeling, through the macro file in ADAMS command to flexible processing of flexible steel wire rope, and the various parameters are set, complete the design of virtual prototype of crane; With the special working environment, Marine crane hoisting dynamic load on Marine crane operation often has a great influence, and thus on the virtual prototype model of crane hoisting, slewing, luffing typica