等离子体法制备钴基费-托合成催化剂及性能表征-催化学报.PDF

2011 Chinese Journal of Catalysis Vol. 32 No. 6 文章编号: 0253-9837(2011)06-1027-08 DOI : 10.3724/SP.J.1088.2011.10116 研究论文: 1027~1034 等离子体法制备钴基费-托合成催化剂及性能表征 黄承都, 白素丽, 吕 静, 李振花* 天津大学化工学院, 绿色合成与转化教育部重点实验室, 天津 300072 摘要：钴基费-托合成催化剂以介质阻挡放电等离子体 (DBD法) 替代传统热焙烧过程来制备, 从而可在低温分解前驱体以获得 高分散催化剂. 结果表明, DBD 法分解前驱体效果与传统焙烧法相同, 但更节能和快捷. 尽管两种方法所得催化剂的比表面积相 近, 但 DBD 法制得催化剂的孔体积和孔径更大, Co 分散度更高, 且 Co 与载体间的相互作用更强, 因而更难还原. 同时, DBD 法处 理催化剂时硝酸钴分解产物以 Co3O4 为主, 其粒径较小 (达 11.8 nm), 其团簇在催化剂表面分布比较均匀. 因此, 在费-托合成反应 中 DBD 法制得的催化剂表现出较高的 CO 转化率和 C5+选择性. 关键词：等离子体处理; 钴基催化剂; 介质阻挡放电; 前驱体分解; 费-托合成 中图分类号：O643 文献标识码：A 收稿日期: 2011-01-10. 接受日期: 2011-03-01. *通讯联系人. 电话: (022 传真: (022 电子信箱: lizhenhua001@ 基金来源: 国家自然科学基金 ; 教育部新世纪优秀人才支持计划 (NCET-06-0239). Preparation and Characterization of Co-Based Catalyst via Dielectric-Barrier Discharge Plasma Decomposition for Fischer-Tropsch Synthesis HUANG Chengdu, BAI Suli, LÜ Jing, LI Zhenhua* Key Laboratory for Green Chemical Technology of Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China Abstract: To obtain a highly dispersed Co-based catalyst, dielectric-barrier discharge (DBD) plasma instead of calcination was used to decompose the precursors at low temperature. It was found that DBD plasma can not only replace calcination to get catalyst precursor de- composed but also be quicker and more energy-saving. The catalyst samples treated by the two methods had similar surface area, while pore volume and pore size of the sample treated by DBD was l