Xx工程现场材料控制程序FieldMaterialControlProc.pdf

Xx 工程现场材料控制程序 Field Material Control Procedure 1 目的 Objective 2 2 范围 Scope 2 3 参考文献 References2 4 定义 Definition 2 5 职责 Responsibility4 6 材料跟踪控制流程图 Flow Chart Of Material Traceability 6 7 主要工作内容 Main working processes 6 7.1 材料的进场验收 The receiving inspection and acceptance of the Materials 6 13 7.2 材料的存放 Stocking of materials 7.3 标识管理 Marking management15 7.4 材料的发放 Dispatch of materials 20 7.5 材料的质量保证书管理 21 8 过剩或废旧材料的处理 Handling of surplus or waste materials 22 9 附录 23 9.1 Reports of the Unsatisfactory, Overage, Shortage, Damages Material (UOSD’s) Form23 9.2 Material Relocation Report Form 23 1 目的 Objective 本程序的编制是为 xx 罐区的施工提供材料的报验、控制、储存和使用的控制方法和指导措 施，以满足中国政府对工程建设强制性标准条文、施工验收规范、工程质量验收统一标准 的要求以及满足业主对使用的要求。 This procedure is established to provide control methods and instructions for inspection, control, storage and use of the materials for the construction of the xxtanks of xx petrochemicals project so as to meet the requirements of the compulsive standard ordinance of the Chinese government for engineering construction, the specifications of inspection and acceptance of construction and the unified standard of engineering quality, and the requirements of the owner for usage. 2 范围 Scope 本程序适用于 xx 罐区工程 xx 台储罐材料的报验、控制、储存和使用。 This procedure is suitable for inspection, control, storage and use of the materials for the xx storage tanks of the intermediate and product tanks of xx petrochemicals project. 3 参考文献 References 3.5 GBJ128—90 《立式圆筒形钢制焊接油罐施工及验收规范》 The specifications of the construction, inspection and acceptance of vertical welded