基于ANSYS的烟组推手有限元分析和优化设计-烟草科技.PDFVIP

2018 年4 月 烟草科技 Apr. 2018 第51 卷第4 期 Tobacco Science Technology Vol. 51 No. 4 基于ANSYS 的烟组推手有限元分析和优化设计 汤达伟，吴 旭，方 鑫 中烟机械技术中心有限责任公司，上海浦东金桥出口加工区新金桥路1888号10号楼 201206 摘要：为改善FOCKE FX 硬盒包装机组烟组推手的推烟效果，采用ANSYS 软件对烟组推手进行了有限 元分析，通过导入CREO 三维模型用于静态分析得到烟组推手的应力值和位移变形量，采用试验设计确 定影响烟组推手的主要参数，根据敏感度分析的结果对烟组推手进行了优化。改进后烟组推手应用于 FOCKE FX 硬盒包装机组进行测试，结果表明：①优化后在不增加推手质量的前提下，推手的应力值和 变形量分别降低23.0%和32.5% ；②机组的推手变形量及磨损情况明显改善，使用寿命由14.3 个月延长 到20.5 个月。该方法为提高卷烟包装设备的生产性能提供了技术支持。 关键词：卷烟硬盒；包装机组；ANSYS 软件；烟组推手；有限元分析；优化设计 中图分类号：TS434 文献标志码：A 文章编号：1002-0861 （2018 ）04-0087-07 Finite element analysis and optimized design of cigarette group pusher based on ANSYS TANG Dawei, WU Xu, FANG Xin China Tobacco Machinery Technology Center Co., Ltd., Shanghai 201206, China Abstract: In order to improve the performance of cigarette group pusher in FOCKE FX hard packer, an ANSYS software was used for the finite element analysis of the pusher, CREO 3D model was introduced into the static analysis to obtain the stress and displacement strain values of the pusher. The major parameters influencing the pusher were determined through experimental design, and the pusher was optimized on the basis of the results of sensitivity analysis. The modified pusher was applied to FOCKE FX hard packer, the test results showed that: 1) On the premise of ensuring the mass of the pusher unchanged, its stress value and strain value decreased by 23.0% and 32.5% , respectively. 2) The deformation and wear of the pusher alleviated obviously, and the working life of the pusher prolonged from 14.3 to 20.5 months. This method provides a technical support for promoting the performance of cigarette packing machine. Keywords: Hard packet for cigarette; Packer; ANSYS software; Cigarette group pusher; Finite