山东某硫铁矿烧渣硫酸浸出液制备铁红工艺探究.pdfVIP

４７ ２ Vol．４７ No．２ ２０１８ ２ Applied Chemical Industry Feb．２０１８ １，２ １，２ １，２ １，２ １，２ ， ， ， ， （１．， ６２１０１０ ； ２． ， ６２１０１０ ） ：，pH，， 。 ，１０ mL，２ g ，９７．１８％； １．０ h，８００ ℃，Fe O ９８．７６％，（GB T １８６３—２００８）， ２ ３ A ，１０１（７７４９１）。 ：；；；； ＋ ：TQ ６２２．１ ５；TQ １１１．１９ ：A ：１６７１ －３２０６（２０１８）０２ －０２９３ －０３ １，２ １，２ １，２ １，２ １，２ FU Kai-bin ，JIAO Yu ，XU Xin ，TANG Peng-cheng ，QIN Tian-bang （１．Key Laboratory of Solid Waste Treatment and Resource Recycle，Ministry of Education，Mianyang ６２１０１０ ，China； ２．Shool of Environment and Resource，Southwest University of Science and Technology，Mianyang ６２１０１０ ，China） ：Iron oxide red can be prepared from the sulfuric acid solution of a pyrite cinder from Shandong province．Ammonium hydroxide was used to regulate the pH value of the sulfuric acid solution of the py- rite cinder，and together with ammonium bicarbonate co-precipitate iron ions．The sediment were calcined to prepare iron red．The results showed the deposit rate of iron ion in the sulfuric acid solution of a pyrite cinder was ９７．１８％，when the dosage of ammonium hydroxide was １０ mL，and the dosage of ammonium bicarbonate was ２ g．Iron oxide red （９８．７６％ Fe O ） was gained through １．０ h at the calcination tem- ２ ３ perature of ８００ ℃．The grade of the iron oxide red is A on the basis of the iron oxide pigment standard （GB T １８６３—２００８），the pigments index number is paratonere １０１（７７４９１）． ：pyrite cinder； lixivium； precipitate； roasting； iron oxide red Fe O ， ，。 ２ ３ ，， ７０ ０００