毕业设计（论文）-双联齿轮零件加工工艺及夹具设计.docVIP

PAGE I 双联齿轮零件加工工艺及夹具设计 摘 要：机械制造技术与夹具设计技术已经有在制造业中一百多年历史，随着工业的迅猛发展机制工艺与夹具技术更加日新月异。伴随着基础学科、计算机技术、电子与电气工程的发展，出现了机制工艺与夹具技术系统，并作为一门应用科学已发展成熟，形成了自己的体系和一套行之有效的分析和设计方法。本次设计中我根据所学的知识并结合基本的理论，模拟处理实际的生产工艺，通过这次设计使我能够初步掌握工艺知识，并初步具备设计一个中等复杂零件的工艺规程的能力。 关键词：机械制造,工艺,设计,CAD绘图 Duplex Gear Parts ProcessingTechnology And Fixture Design Abstract：Machinery manufacturing technology and fixture design technology has been one hundred years of history in the manufacturing sector, with the rapid development of technology and the clamp mechanism more rapidly changing technology industry. With the basic disciplines, computer technology, the development of electronic and electrical engineering, technology and the emergence of mechanisms fixture technology systems, and as an applied science has matured, formed its own system and an effective analysis and design methods . The design based on the knowledge I have learned and combining the basic theory, simulation handles the actual production process, through the design process to enable me to the preliminary master knowledge, and preliminary design of a technological process with moderately complex parts capacity. Keywords: machinery manufacturing, process, design, CAD drawing 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc28213 1 设计背景 PAGEREF _Toc28213 1 HYPERLINK \l _Toc30346 1.1 机械制造加工工艺的现状与发展 PAGEREF _Toc30346 1 HYPERLINK \l _Toc30112 1.2 双联齿轮加工工艺规程 2 HYPERLINK \l _Toc25484 1.3 双联齿轮的加工工艺设计 2 HYPERLINK \l _Toc32238 1.4 双联齿轮设计任务 3 HYPERLINK \l _Toc20805 2 零件分析 4 HYPERLINK \l _Toc17151 2.1 概述 4 HYPERLINK \l _Toc28931 2.2 零件图样分析 4 HYPERLINK \l _Toc18957 2.3 双联齿轮图的材料、毛坯和热处理 5 HYPERLINK \l _Toc3998 2.3.1 毛坯材料选择 5 HYPERLINK \l _Toc7950 2.3.2 毛坯形状、尺寸确定的要求 6 HYPERLINK \l _Toc6595 TOC \o 1-3 \h \u HYPERLINK \l _Toc28213 3 工艺设计 7 HYPERLINK \l _Toc30346 3.1 加工方法的选择原则 7 HYPERLINK \l _Toc30112 3.2 加工阶段的划分 7 HYPERLINK \l _Toc25484 3.3 工序的合理组合 8 HYPERLINK \l _Toc32238 3.4 加工顺序的安排 8 HYPERLINK \l _Toc20805 3.5 加工路线的拟定 9 HYPERL