基于雾化器的室内温湿度自动控制系统设计-控制工程专业论文.docxVIP

Design on automatic control system of indoor te mperature and humidity based on atomizer ABSTRACT With the rapid development of technology and society, each industry has higher and higher requests on temperature and humidity environment. Traditional controller of temperature and humidity depends too much on manpower, which leads to poor efficiency and low accuracy. Now, under the background of great development on informatization, many disciplines are developing together. Engineering level improves greatly. Therefore, it is required to design the auto control system of temperature and humidity with high intelligence and pragmatism. The system can control the temperature and humidity without human being. The thesis does research on a system of auto increasing of temperature and humidity under the controller core of microprocessor, with the use of atomizer to carry out the moderate diffusion to water. This system can be used in daily life, industry, agriculture, etc. For example, increase temperature and humidity at home; Make use on modern medical treatment; Cultivate crops in greenhouse and so on. It includes mainly 5 aspects in details as following: （1）By the meticulous analyzing on the function and requires of the system, it takes a practical scheme with the controller core of microprocessor. During the working process of the controller system, microprocessor analyzes and processes all the inspecting signal, including the signal of temperature and humidity and the others. （2）For the design plan of this system, it selects the type of chip according to the function requirements, based on which it design the interface circuit of each modules。 （3）This system takes the atomizer as the main device for increasing temperature and humidity. Through atomizing hot water, greatly increase the area of heat exchange with air. And it can rapidly transmit the heat of hot water to the air which makes temperature lifting promptly. Otherwise, along with the process of warm up,