造纸法再造烟叶剪切力分析-烟草科技.PDFVIP

烟草科技/TobaccoScienceTechnology 烟草工艺/Manufacturing Technology 2013年第 11期（总第316期） 造纸法再造烟叶剪切力分析 张玉海，常纪恒，邓国栋，姚光明，张彩云，徐大勇，刘朝贤 郑州烟草研究院烟草行业烟草工艺重点实验室，郑州高新技术产业开发区枫杨街2号 450001 摘要：为研究剪切力对造纸法再造烟叶切丝过程的影响，明确国内外造纸法再造烟叶剪切力的差异。利 用质构仪测定了国内外10个造纸法再造烟叶的剪切力，并分析了造纸法再造烟叶剪切力与其切丝刀辊 电流的关系。结果表明：①国内造纸法再造烟叶的剪切力相比国外造纸法再造烟叶明显偏大；②造纸法 再造烟叶剪切力随含水率的增加呈先增大后减小的趋势，其剪切力在含水率12%左右时达到最大；③造 纸法再造烟叶的剪切力越大，其切丝的刀辊电流也就越大。 关键词：质构仪；造纸法再造烟叶；剪切力 中图分类号：TS412 文献标识码：A 文章编号：1002-0861 （2013 ）11-0008-03 ShearingForceofPaper-makingProcessReconstitutedTobacco ZHANG Yuhai, CHANG Jiheng, DENG Guodong, YAO Guangming, ZHANG Caiyun, XU Dayong, and LIU Chaoxian Zhengzhou Tobacco Research Institute of CNTC, Zhengzhou 450001, China Abstract：In order to study the influences of shearing force on the cutting of paper-making process reconstituted tobacco (RT) and find out the differences of shearing force between domestic and imported RT, the shearing force of 10 samples of domestic and imported RT was determined by a texture analyzer, and the relationships between shearing force and electric current of the cutting drum were analyzed. The results indicated that: 1) the shearing force of domestic RT was obviously larger than that of imported RT; 2) with the increase of moisture content, the shearing force of RT increased first then decreased, which reached its maximum at the moisture content of about 12%; 3) higher shearing strength of RT led to higher electric power consumption of cutting drum. Keywords：Texture analyzer; Paper-making process reconstituted tobacco; Shearing force 造纸法再造烟叶是以烟末、烟梗、碎片等烟草物质， 异，造纸法再造烟叶经切丝机加工后，切丝宽度均匀性 配以粘合剂等重新组合的产品。因其具有填充值高、 较差、合格率较低，影响烟支内在质量稳定性。同时当 焦油释放量低，且可根据实际需要对造纸法再造烟叶 叶组配方中造纸法再造烟叶的比例增大到一定程度时， ［1 ］ 物理性能和内在化学指标进行人工调控等优势 ，已 则需要通过提高切丝机刀门压力来减少跑片的产生，而 ［2-5 ］ 成为卷烟配方尤其是低焦油卷烟配方的重要组成部分