基于专家系统的跳汰机风阀自动控制-机械电子工程专业论文.docxVIP

姗碟础撇Y 姗碟础撇Y 518338 基于专家系统麓蹴汰枕风阀自动控制 摘要 跳汰选矿是物理选矿的一种重要方法。跳汰枫作为选煤 厂的关键设备，影响其自动控制的关键是跳汰机风阀的自动 控制。风阔参数的调整操作繁琐，人为主观因素参与控制过 程。所以，有必要寻求一种更为有效的、先进的控制方案实 现跳汰机风阀的囱动控铡。 本论文研究了基于专家系统的跳汰机风阀的自动控制。 作者在￥射线探测器检测床层物料密度憨基础土，分提了跳 汰机床层的分层状态，遂用AR模型对密度数据进行趋势预 测，进恧对康层松教度傲凄估诗，建立了风阕参数静调整麓 则。专家系统可根据测彳辱的床层密度数据，基于羧取的专家 知识对风阙参数遂行榻廒熬修改。 本系统采用VB6．0高级语富编写程序。控制系统的组成 雹摇：可编程逻辑控锲嚣、了射线辐嚣搽溅器以及工控橇。 实验室中用数据输入法对软件进行测试，证明：能够实 现蔑阕参数麓自动调节。 关建谴：专家系统，魏汰梳，殿阕，丫蹇雩线，舀动控裁 奎璺堡三查兰堡主兰垡笙奎 奎璺堡三查兰堡主兰垡笙奎 ：——一—— JIGGING AIR—VALVE AUTO—CONTROL BASED ON EXPERT SYSTEM ABSTRACT Jigging milling is one of the most important ways for physics millitlg As the key equipment of the coal-dressing factories，the key problem that affects the auto—control of the jigging machine is the auto·control of air．valve．The readjustment of air-valve parameters is trivial and the factitious subjective factors are mixed up in the control process．So，it is necessary that a more effective and advanced control draft needs to be found to realize the auto—control for jigging air-valve． In this thesis，an auto-control draft for jigging air-valve based on expert system is researched．As Y—ray radiation detector can get the material density of the coal bed，and the delaminating state is analyze and the AR model for the density of the coal is established to estimate the trend of the data．then the porosity of the coal bed is estimated and the modification rule of the air-valve parameters is established．The expert system can modify the air-valve parameters according to expert acknowledge acquired and the real-time data to get the satisfied sort cffect． VB6．0 is used for programming．The control system includes：PLC， Y—ray radiation detector and PC for industry． The laboratory test to the software shows：the auto—control of the air—valve parameters can be realized． Key words：expert system，jigging，air-valve，Y-ray，auto-control 太原理工大学硕士学位论文第一章绪论 太原理工大学硕士学位论文 第一章绪论 §1．1跳汰选矿介绍 跳汰选矿，是指物料在垂直升降的交变水流中，按密度差异进行 分层和分离的过程。跳汰过程中所使用的分选介质是水或者空气，个 别情况下也可能是重悬浮液。以水作为分选介质的跳汰过程称为水力 跳汰；以空气