基于自适应推理控制的大功率开关电源应用研究-电力电子与电力传动专业论文.docxVIP

II II Abstract In recent years, applied technology of high-power full-controlled power converter become more mature, high-power mining sets and transportation equipments are applied widely, so the demand of high-power switching power supply is increasing greatly. However, due to the special mining space and unique coal bed texture, the coal mine environment is bad, supply network structure is complex, and power supply load is various, so high performances of high-power switching power supply is required. Aiming at the unique environment in underground coal mine, combined with the problem of high-power switching power supply of measurable outputs and unmeasurable load disturbance, an adaptive inferential control scheme is proposed. The present situation of high-power switching power supply is summarized, future development trend is analyzed, and control technology have been described, then the design philosophy is proposed. Through the comparison of several kinds of typical topology structure, a ZVZCS soft-switching circuit using two diodes in series with the lagging leg is selected, and the topology of 6 operating mode in a half week are analyzed. According to the theoretical calculation, some parameters of important components in circuit are gained, combined with experience to select, IGBT power switches are selected to design power main circuit, the high frequency transformer is adopted, and a full wave rectification circuit is used to transmit power. The small signal model of a phase-shifted full-bridge ZVZCS converter is established, then the control-output transfer function is obtained, after adaptive control is integrated with inference control, adaptive inferential control scheme is proposed, which can deal with the difficult problem of establishing model and unmeasurable load disturbance, a stable voltage output is acquired. High-power switching power supply system is simulated based on MATLAB simulation platform, related simulation experiments are tried abo