基桩竖向承载能力的自平衡试桩法理论研究-岩土工程专业论文.docxVIP

武汉理工大学硕士学位论文衡试桩法与传统静载试验具有较好的一致性；采用本文的提出的数据转换 武汉理工大学硕士学位论文 衡试桩法与传统静载试验具有较好的一致性；采用本文的提出的数据转换 分析方法，转换曲线与传统静载曲线吻合性较好，极限承载力的判定误差 在10％左右，能够满足工程精度的要求。 最后，在全面总结论文工作的基础上，提出了本课题尚有待进一步深 入研究的一些问题。 关键词：基桩承载力 自平衡理论研究 II 武汉理工大学硕士学位论文Abstract 武汉理工大学硕士学位论文 Abstract Traditional load test is generally accepted as a most directly and reliable method for determining the bearing capaeity of piles． Because the method need special reaction system，it wiil take more time and money and require high condition for test field．So it cannot be done randomly and widely，and cannot be done under hardly conditions．Load test is difficult to be carried with the development of higher bearing capacity and long length．As a new measuring technology，self--balanced method has its advantage on technology and economy．At present it is first load test method in north American and it has been applied in some province in china． The final purpose of self--balanced method is to get top Q-s curve，and determine ultimate bearing capacity of single pile based on it．Because of the difference of loading way and load transfer mechanism， its transferred result has some deflection with traditional load test．So how to transfer scientificallY self— balanced test data into top load curve according to its actual working behavior，become the obstacle of its practical application． In accordance with actual forcing behavior and reaction mechanism between pile and soil，The artiele analyzes the relation between top part and bottom part，load transferring mechanism and difference with other loading way by ANSYS program．So the reliability of determine bearing capacity by self--balance method has been proved．Based on above three methods of transferring self—balanced test data into top load data have been provided and Ill —————————————璺堡里三查堂堡主堂垡笙塞relative —————————————璺堡里三查堂堡主堂垡笙塞 relative computer program has been edited．The contrast test between self—balance test and top load test has