齿轮泵简介(中英对照).docVIP

Gear pump Chinese Name: gear pumpName: gear pumpDefinition: rely sealed in a housing of two or more gears, the work space is generated in the process of mutual engagement volume change to liquid delivery pump.Applied disciplines: mechanical engineering (a subject); drive (two subjects); hydraulic transmission (two subjects) The gear pump is to rely on the change and moving of the working volume of the pump cylinder and the ring gear formed between rotary pumps for conveying liquid or so pressurized. Form two closed space by two gears, pump, front and rear cover, when the gear is rotated, the gear is disengaged from the side of the space volume grew larger, forming a vacuum, the liquid suction, the gear meshing side of the volume of the space from large small, while the liquid squeeze into the pipeline to go. The suction chamber and the discharge chamber is spaced by two gears meshing line to. The outlet pressure of the gear pump is entirely dependent on the size of the pump source resistance. The concept of the working principle of the gear pump is very simple, i.e. in its most basic form is the same as the two dimensions of the gear in a close fit within the housing. The engagement rotation, the interior of the housing is similar to the 8 shape, the two gears are mounted on the inside, the outside diameter of the gear, and both sides of the housing close fit. From the extruder, the material in the suction port into the middle of the two gears, and to fill this space, the rotation direction of the housing with the teeth movement, and finally discharged in the two toothing. Speaking in terminology, gear pump, also called a positive displacement device, i.e. as a cylinder bore of the piston, when one tooth into the fluid space of another tooth, the liquid is mechanically squeezed row out. Because the liquid is incompressible, so the liquid and the tooth at the same time can not occupy the same space, so that the liquid has been excluded. This phenomenon con