环模制粒机的有限元分析及试验研究-农业机械化工程专业论文.docxVIP

环模制粒机的有限元分析及试验研究中文摘要本文以颗粒饲料加工关键设备环模制粒机为研究对象,对环模制粒机在实际生产中 出现的问题进行了研究;环模制粒机的性能评价,一般有制粒质量 生产率 制粒机功耗 制粒机使用寿命等指标为了实现对环模制粒机综合性能的评价本课题研究过程中 采用试验设计的优化方法和有限元分析方法相结合的研究方法 在试验设计中 采用正 交试验的方法以 611 型鸡饲料作为颗粒饲料的原料分析混合饲料的调质温度调质 水分油脂添加量粉碎粒度等试验因素对制粒质量生产率电耗的影响有限元分 析中以 UGANSYS 作为仿真环境针对制粒机使用寿命的问题通过对环模制粒机中的 关键零件环模进行动力静力热结构耦合分析获得一系列参数化后的环模的平均应 力作为环模使用寿命的评价指标 以实验设计的优化思想和有限元分析方法对各个影响 因素作了排列组合式的实验安排 力求达到量化分析的目的 本课题最终完成环模制粒 机核心工作部件环模制粒总成仿真模型的建立对环模制粒机整机实现优化的目的,环 模制粒机的仿真模型和数值分析模型对于环模制粒机的使用厂家和设计者都有很好的 应用价值和参考价值对于环模制粒机的研究方法是一次突破和有意义的尝试关键词环模制粒机有限元优化 Finite Element Analysis and Experimental Study of Hoop Standard GranulatorDeng yong(Agricultural Mechanization Engineering) Supervised by Shi jianxin Abstract In this paper the key device of producing pellet feed: hoop standard granulator is regarded as studying object, problems of practical production about it are studied. The character evaluation indexes of hoop standard granulator generally consist of quality of making pellet, productivity, power consumption, and service life .To realize synthesized evaluation of the machine, the combination of experimental design optimizing method and finite element analysis method is adopted in studying this subject. Method of perpendicularity experiment is adopted in designing experiment. Chicken feed of model 661 is regarded as raw material of pellet feed, the influence that experimental factors including modulation-character temperature, modulation-character moisture, grease-additive quantity, and comminuting granularity have on making pellet quality, productivity, and electricity c onsumption. UG and ANSYS are regarded as simulating circumstance in finite element analysis, for problem on service life of the machine, evaluation index that average stress of a series of parameterized loop die is regarded as service life of hoop standard granulator is achieved by dynamic, static, and thermal structure coupling analysis for key part: loop die of the machine. For every influencing factor the experimental arrangem