集成光波导与光纤的耦合设计分析-光学工程专业论文.docxVIP

华中科技大学硕士学位论文 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract Optical integrated device is the core of the optical network and the support of the optical communication technology. The optical mode field mismatch and the direction dislocation of the optical integrated devices will bring serious coupling loss, and becoming the major factor of restricting the coupling efficiency. This thesis is focused on the mode field mismatch loss and the misalignment loss of the optical integrated device in the package. Based on the theory of coupling efficiency, we simulated the direct and indirect coupling models of the integrated waveguides and optical fibers. We compared the coupling losses of different coupling modes and summed up the coupling laws of the integrated waveguides and fibers. We divide the article into two parts, including the theory and simulation: the first part discusses the reason of engendering the insertion loss and methods of eliminating total insertion loss, then study the coupling theory. The second part includes the modeling of three types of models, the numerical law and coupling error on the influence law of transmission performance. We study the coupling efficiency from the following parts: establishing the coupling models of different waveguides and fibers, putting diffractive optical elements in the middle of fiber and waveguide, and establishing array waveguides and optical fibers coupling models. At last, through the simulation, we summarize the influence law of different coupling models and different alignment accuracy (lateral, axial and angular offset) on coupling loss, and then conclude the efficient coupling mode. In this thesis through the study of coupling between the optical waveguide and the optical fiber, the research will provide a theoretical basis and guidance for designing coupled package platform and achieving practical use of the integrated optical device. Key words: Integraded optical waveguide Fiber Coupling efficiency Beam Propa