继电器综合参数检测系统-控制科学与工程专业论文.docxVIP

继电器综合参数检测系统 继电器综合参数检测系统 DETECTING SYSTEM OF RELAY INTEGRATED PARAMETERS ABSTRACT Relay is a kind of auto controlling apparatus with reaction to the input signal of specific pattern. It is widely used in control systems. With respect to the reliability and security of these systems, relays must be detected efficiently, objectively and roundly by the detection system before they are sold out. The voltage parameters and time parameters are significant ones to keep the quality. Along with the rapid advance of microelectronic, it is an inevitable trend for modern detecting technology as well as a general way to design intelligent instrument. The single-chip microcomputer plays a key role in detection area. Therefore, research about detecting system for relay parameters based on the single-chip microcomputer has always been the critical field in the academic community of electrical apparatus all around the world. On the basis of principle of the relay action and analysis of property for relay parameters, this paper utilizes the single-chip microcomputer simulation software named PROTEUS ISIS, which carries out a virtual development and design for SCM system, coil voltage, coil current signal conditioning and acquisition circuit. The PROTEUS ISIS can run the program directly without fabricating, welding, debugging on the real circuit board. Hence, it decreases cost and increases development efficiency to conduct the practical work after using the PROTEUS ISIS to produce it successfully. On the basis of these studies, the detection system of relay parameters using single-chip microcomputer as the core of lower computer has been developed in this paper. Through the control of PC, real-time detecting for specific parameters, displaying the digital results on the screen of man-machine interaction, this system makes such detection intelligent and humanistic. It consists of hardware and software. The former is composed of these designs: detecting circuit based on single-chip mic