基于改进PCA–ELM方法的穿孔机导盘转速测量-控制理论与应用.PDFVIP

27 1 Vol. 27 No. 1 2010 1 Control Theory Applications Jan. 2010 :2010 PCA–ELM , , , , (1. , 110004; 2. , 201900) : , , . , , . , , , . , (ELM). (PCA), , , ; , . PCA–ELM, . : ; ; ; : TP273 : A Modeling and control of guide-disk speed of rotary piercer XIAO Dong , WANG Ji-chun , PAN Xiao-li , MAO Zhi-zhong , CHANG Yu-qing (1. School of Information Science and Engineering, Northeast University, Shenyang Liaoning 110004, China; 2. BaoSteel Corporation, Shanghai 201900, China) Abstract: Recently, to improve the quality of seamless steel tubes, many domestic billet enterprises use skew rolling piercer with Diescher guide-disc to pierce steel billets. However, in skew rolling piercing, the guide-disc speed can’t be measured directly because of the limitations in practical conditions. Therefore, an online soft measurement of the guide-disc speed has to be developed for controlling the guide-disc speed to improve the productivity and quality of steel tubes. To cope with this problem, we propose a measurement model based on the extreme learning machine(ELM) method with improvements made by us in this paper. This improved ELM method is combined with the principal component analysis(PCA) to let the input values of ELM be analyzed by PCA for improving the generalization performance. On the other hand, the training and predicting time of ELM is reduced by classifying the hidden layer nodes. Thus, a model based on the improved PCA–ELM method is establishe