- 35
- 0
- 约3.83千字
- 约 13页
- 2019-05-07 发布于广东
- 举报
Part1 Text Fig 5.1 The Positions of the Key in the Ignition Switch Fig 5.2 Ignition Switch Part1 Text There are five positions(see Fig 5.1) for the ignition switch (see Fig 5.2): START, ON, OFF, LOCK and ACC . START—Start motor on. Release the key at once the engine starts so that you don’t damage the starter . The key will return to the ON position when released. ON—Engine is on and all accessories are on. You may test many of your vehicle’s warning lights to make sure they workbefore you start the engine. This is the normal driving practice. OFF—Allows you to shut off the eng
您可能关注的文档
- 劳动出版社电子课件-《数控车床编程与操作(FANUC系统)》-B01-9459第六章 内轮廓加工.ppt
- 劳动出版社电子课件-《数控车床编程与操作(FANUC系统)》-B01-9459第四章 外轮廓加工.ppt
- 劳动出版社电子课件-《数控车床编程与操作(广数系统)》-B01-9575第一章 数控车削编程基础.ppt
- 劳动出版社电子课件-《数控车床编程与操作(广数系统)》-B01-9575第七章 螺纹加工.ppt
- 劳动出版社电子课件-《数控车床编程与操作(广数系统)》-B01-9575第三章 数控车仿真加工.ppt
- 劳动出版社电子课件-《数控车床编程与操作(广数系统)》-B01-9575第九章 技能鉴定实例.ppt
- 劳动出版社电子课件-《数控车床编程与操作(广数系统)》-B01-9575第四章 外轮廓加工.ppt
- 劳动出版社电子课件-《普通车床加工实训(高级模块)》-A02-1646模块一.ppt
- 劳动出版社电子课件-《普通车床加工实训(高级模块)》-A02-1646模块二.ppt
- 劳动出版社电子课件-《普通车床加工实训(高级模块)》-A02-1646模块五.ppt
原创力文档

文档评论(0)