掘进机截割头设计系统研究-机械设计及理论专业毕业论文.docxVIP

摘 要 截割头是掘进机上最为关键的部件，其设计的好坏直接影响整机的性能。截割头的 设计参数众多，设计的自由度很大，使用参数化方法进行设计是提高设计效率的有效途 径。 本文首先建立了截齿排列参数化理论，以此理论作为核心和出发点，编制程序，用 软件实现截齿排列的参数化，编制作为截齿排列评价手段的切屑图软件和载荷图软件。 然后，用二次开发的方法完成截齿和齿座的虚拟装配的软件模块，完成可对截齿和齿座 进行参数化设计以及可以调整截齿和齿座装配位置的软件模块，以及以最佳截割头头体 轮廓为目标的截割头头体参数化设计模块。从而实现了整个截割头参数化建模的设计系 统。 该设计系统可完成截齿排列的参数化设计、截齿齿座的虚拟装配、截齿排列的调整、 截齿齿座的参数化设计、截割头头体的参数化设计等任务，容设计、修改于一体，通过 不断地完善与修改，可设计出性能理想的截割头。 关键词：掘进机；截割头；截齿排列 ；参数化设计；切屑图；二次开发；虚拟装配 本论文内容选自： (1) 掘进机截割头研发与设计，项目编号：09-Z33 (2) 辽宁省教育厅创新团队项目，项目编号：2008T068 Abstract Cutting head is the most critical components of the Roadheader, its design will affect the machines performance. The cutting head has a number of design parameters, and its design freedom is large.Using the parametric approach to design is an effective way to improve design efficiency. This article first establishes a parameter theory of pick arrangement parameterization, which was used as the core and starting point to realize the pick arrangement parameterization and the softwares of cutting pattern and cutting load which are the appraisal tool by the means of programming. Then, the virtual assembly of pick and pick holder software module, parametric design of pick and pick holder software module,the adjustment of pick position software module and parametric design of the body of cutting head software module, whose target is to get the best outline of the body,are developed by secondary development technique.Then the parametric design system of cutting head forms. The design system can be ordered to complete the following tasks: pick arrangement parametric design, virtual assembly of the pick and pick holder, adjustment of pick position, parametric design of pick and pick holder, parametric design of the body of cutting head.It accommodates design and changes in one,which can work out good performance cutting head by continuously improved and modified. Key Words：roadheader；cutting head；pick arrangement ；parametric design；cutting pattern; secondary development; virtual assembly 目