20XX年新南利打端子培训教材.ppt

51 Proper Placement of Wire (end feed) Its important for each portion of the wire to be in the correct position relative to the tooling: Stripped wire in wire crimp tooling Insulation in insulation support crimp tooling End of insulation should be between the two crimp areas Positioning of the terminal by the applicator is also shown 52 Proper Placement of Wire (side feed) Positioning of wire for side feed product and tooling 14 14 14 14 Stripping Wire; Good Strips Remove cleanly without tears or angles No nicks or cut strands 15 15 15 15 Stripping Wire; Bad Strips Nicked Strands Cu