两产品高密度旋流器试验及流场分析-矿物加工工程专业论文.docxVIP

煤炭科学研究总院硕士学位论文 煤炭科学研究总院硕士学位论文 万方数据 万方数据 Abstract The purpose of this article is to develop a new type of high density two products heavy medium cyclone, therefore we have carried on the laboratory test and numerical simulation, at last application of Fluent is used to verify. Based on the conventional cyclone development ， on the premise of guarantee capacity and separation effect, develop high density two-product heavy medium cyclone was developed with low filling slurry and separation density difference of 0.3 g/cm3, throngh the high density separation hydrocyclone cone angle, overflow tube, taper ratio, flow and structural parameters, such as the pressure, the material density, suspension operating parameters, such as coal slime content of industrial laboratory test, Using Fluent software numerical simulation to analyses the internal flow field of the high density separation hydrocyclone radial velocity, tangential velocity, axial velocity, pressure and density, summarizes high density separation hydrocyclone he internal flow field characteristics and masters high density separation structure parameters and operating parameters. 1、Experiment study. In this paper, through experimental research each set of test separation effect of Ep value and separation density difference ΔDp calculation, the pressure is determined at 0.05 MPa, the density is determined at 1.50 g/cm3, slime content is determined at about 20% in all kinds of high density separation hydrocyclone structure parameters. Experiment has been to provied: two high density products heavy medium cyclone can realize high density separation，the main factors influencing the high density separation is cone angle, the overflow tube inserted depth and the taper ratio, one of the most main characterize is its big cone angle. 2、Numerical simulation . For high density separation hydrocyclone internal velocity field and pressure field in analysis by using computational fluid dynam