00115 NREL Design Evaluation Procedure (DP01)设计评价讲义.pdfVIP

NREL Design Evaluation Procedure (DP01) •DP01 is a quality procedure that outlines the steps NREL follows in the Design Evaluation process •Assures critical quality checks are followed •Assures conformance with IEC WT01 Certification Standard. •Conforms with ISO Guide 65 (certification bodies) •Refer to the NREL Certification Guidelines/NREL Quality Documents folder on the procurement web page to find this and other documents describing NREL’s certification procedures 5/1/2001 1 National Wind Technology Center Review of Standard Requirements •Certification requirements are set by IEC WT01 •Technical design requirements are set by IEC 61400-1 (or -2) •Guidelines and checklists help designs meet requirements and evaluators apply consistent interpretations. IEC Requirements •WTGS01 •61400-1 (large turbines) •61400-2 (small turbines) Designers Aids Evaluation Aids •Checklists •QA systems •Guidelines •QA procedures and forms •Text Books •Checklists 5/1/2001 2 National Wind Technology Center IEC WTGS 01 (61400-22) Type Certification Requirements (61400-1, 61400-2) - ControlProtection System - Loads and Load Cases - Structural Components - MechanicalElectrical Comp. - Component Tests - Foundation Design Requir. (ISO 9000, 9002) - Design Control - Quality Sy