wincc培训—中文版精编版.pptVIP

* Exercise: Archives and This series of exercises deals with creating online trends and creating Online Trends and configuring measured value archives in Tag Logging. These measured value archives are then used in the trend screen of the controller faceplate.After completion of all activities and tests, the multiproject is to be archived. Exercise 1 In activated runtime click the button for Create Online Trend Group.Create a trend group with the setpoint and actual value of the PID controller.For this exercise adapt the properties of the online trend control during runtime, i.e. value range of the values axis from Automatic (Autoranging) to fixed values 120 units.Test trend display in the loop display of the controller for Unit C. Steps 1. In runtime activate the button for creating online trend groups and create - a new trend group with two trends for active setpoint  and the measured process variable of the PID controller from Unit C.2. Start runtime with Tag Logging activated3. Create an online trend group containing the actual setpoint  SP and the process variable PV_IN of the PID controller from Unit C.3. Left-click on the parameters button of the online trend control to open the  Properties dialog box. Insert a 2nd trend, select the name  Set and Act and choose suitable colors for the trend. Open the tab sheet  Value Axis and set the area selection from  Automatic to fix 0 - 120. * Archiving Archiving a project means creating a compressed file from many files and directories - usually as a ZIP file. The SIMATIC Manager provides an integrated interface for ZIP archives.However, you can also use PKZIP for Windows, an additional compression tool which is included on the installation CDs, for archiving and de archiving. Preparations Exit all SIMATIC Tools such as HW Config, CFC Chart, SFC Chart or WinCC - as well as CS and RT.The SIMATIC Manager is the only program open - and it is advisable to close the multiproject there