开始使用行车记录仪-Subini.DOC

Introduction Thank you for purchasing this double-recording high definition automobile data recorder. Memory of this machine can be expanded to 32GB. In order to develop maximum efficacy of your machine, please firstly read this operational manual. Host Product Structure 1. Power Button; 2. Reset Button; 3. T Card Slot; 4.Rear-view Camera Interface; 5. HDMI Interface; 6.USB/DC Interface; 7.GPS; 8. Display; 9.Video Button; 10. Menu Button; 11. Playback Button; 12. Camera Button; 13. Microphone; 14. Lens Appearance of Rear-view Camera 1. Interface connecting to host Start to use the automobile data recorder 1. Power on: (1). The machine will automatically power on and began recording after it was connected to the charger; (2). The machine also provides the mode of long pressing the Power Button for power on, namely press the Power Button once and wait about 3 seconds, after showing the Boot screen, the green power indicator lights up for the boot. 2. Power off: (1). The car cigarette lighter stalls during the videoing, it automatically saves and stalls after 10 seconds of videoing, The car cigarette lighter stalls when it stops videoing, the machine will automatically shut down; (2) Long press the Power Button once, the machine appears the shutdown screen and power off. Note: If being low battery, the automobile data recorder automatically powers off after the indication of low battery. Battery Charging There are three ways to charge the battery, the red charging indicator lights during charging, with about 2 hours of entire charging time, and the red charging indicator automatically lights off after the completion of charging. 1．Use the power socket for charging 2．Use the USB for charging 3．Use the vehicle power supply for charging Insert Memory Card The Micro SD Memory Card inserts into the slot straightly according to the giving direction until hearing a sound. Remove Card The Micro SD Card is pushed forward, and it can be removed after the card pops. Note: