水力压裂储层孔隙度计算方法.PDF

第43卷第9期 中国测试 Vol.43 No.9 2017年9月 CHINA MEASUREMENT TEST September，2017 doi院10.11857/j.issn.1674-5124.2017.09.003 水力压裂储层孔隙度计算方法 周晓华袁 孟文博袁 甘棣元 渊吉林大学仪器科学与电气工程学院袁吉林 长春 130026冤 摘 要院孔隙度是对水力压裂施工进行评价的一个重要参数袁为准确地计算压裂后储层孔隙度袁结合储层压裂前初始 孔隙度的测井结果和微地震监测技术的监测结果提出一种水力压裂储层孔隙度计算的新方法遥首先对储层孔隙度的 计算方法进行分析袁然后结合微地震监测技术的监测结果进行新计算方法的推导袁最后以一次压裂实验后目标储层 孔隙度计算过程为例袁证明该计算方法的有效性遥 结果表明院相较于测井法袁利用压裂前测井参数和压裂后微地震监 测结果结合的方法能够有效避免压裂对孔隙度测量尧计算的影响袁计算结果能更合理地反映压裂后储层的孔隙度遥 关键词院孔隙度曰水力压裂曰测井信息曰微地震监测 文献标志码院A 文章编号院1674-5124渊2017冤09-0013-05 Calculation method of porosity of hydraulic fracturing reservoir ZHOU Xiaohua袁 MENG Wenbo袁 GAN Diyuan 渊College of Instrumentation 驭 Electrical Engineering袁Jilin University袁Changchun 130026袁China冤 Abstract: Porosity is an important parameter for the evaluation of hydraulic fracturing. In order to accurately calculate the porosity of fractured reservoir袁 a new method of calculating porosity of hydraulic fracturing reservoir is proposed by combining the logging results of the initial porosity before fracturing and the monitoring results of micro-seismic monitoring technology. The calculation method of reservoir porosity is analyzed袁 and then combined with the monitoring results of micro-seismic monitoring technology袁 the new calculation method is deduced. Finally袁 the effectiveness of the calculation method is proved by the calculation process of the reservoir porosity after primary fracturing experiment. The results show that compared with the logging method袁 the method of combining the logging parameters before fracturing and the micro-seismic monitoring results after fract