釉面和托槽联合处理后再粘结强度的研究.pdfVIP

王祺 遵义医学院硕士学位论文 Study of rebonding strength with processing enamel and bracket Abstract Objective: To investigate the clinical loss rate of brackets and the shear bond strength of brackets, using three different processing methods on debonded enamel, and with new bracket or recycled brackets which were burned. Clinic and experimental results were combined to explore the processing methods. Methods: Experiment in vitro: 70 extracted premolars were collected, 70 edgewise brackets were bonded, shear bond strength of 10 premolars as control group (group A) were tested. 60 premolars’ brackets were debonded using pliers and randomly divided into six groups were processed: group B1,the enamel was cleaned using tungsten carbide bur with new bracket; group B2, the enamel was cleaned using tungsten carbide bur with recycled brackets which were burned; group C1,the enamel was cleaned using tungsten carbide bur and polishing with new bracket; group C2,the enamel was cleaned using tungsten carbide bur and polishing with recycled brackets which were burned; group D1, the enamel was cleaned using silicon particles with new bracket; group D2,the enamel was cleaned using silicon particles with recycled brackets which were burned. The shear bond strength of every group was tested. Clinical trial: The research objects were selected from department of stomatology, the Fifth Affiliated Hospital of Zunyi Medical College from 2012 to 2013.8 patients’52 premolars as control group(group E) were first bonded,