传热结构自适应拓扑优化准则法研究-机械工程学报.pdfVIP

第 53 卷第 20 期 机 械 工 程 学 报 Vol.53 No.20 2017 年 10 月 JOURNAL OF MECHANICAL ENGINEERING Oct. 2 0 1 7 DOI ：10.3901/JME.2017.20.153 传热结构自适应拓扑优化准则法研究* 魏 啸 丁晓红 (上海理工大学机械工程学院 上海 200093) 摘要：合理的散热通道分布是提高小空间大热流密度传热结构散热性能最有效的手段。针对现有传热结构拓扑优化设计结果 形态过于复杂，存在棋盘格、灰度单元等数值不稳定现象，提出一种基于基结构的散热通道分布的自适应拓扑优化方法。研 究了适用于传热结构拓扑优化问题的基结构构建技术，建立满足库恩-塔克(Kuhn-Tucker，KKT)最优准则条件的迭代公式； 以散热弱度最小为优化目标，以杆单元截面积为设计变量，对典型的二维和三维设计问题进行散热通道分布设计，并将设计 结果与 COMSOL 软件优化结果进行对比。研究结果表明，提出的传热结构自适应拓扑优化方法产生的散热通道形态简单清晰， 能满足散热性能，且优化过程收敛速度快，克服了现有优化方法产生的数值不稳定问题。 关键词：散热通道分布；拓扑优化；最优准则法；基结构；自适应成长 中图分类号：TK124 Adaptive Topology Optimization of Heat Transfer Structure by Optimality Criteria WEI Xiao DING Xiaohong (School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093) Abstract ：Reasonable heat transfer channel layout is the most effective approach to improve the heat transfer performance of small space with high heat flux. Aiming at the excessively complicated shapes of the design results and numerical instabilities, such as checkerboard phenomenon and gray level units, which exist in the current topology optimization of heat transfer structure, an adaptive topology optimization method of heat transfer channel layout based on ground structure is suggested. Construction technology of ground structure that is suitable for topology optimization problems of heat transfer structure is studied and the iterative formula satisfied Kuhn Tucker optimal criterion condition is derived. The cross sectional areas of the bar units are selected to be the design variables and