材料与试验协会 B115-00电解阴极铜.PDFVIP

Designation: B 115 – 00 Standard Specification for Electrolytic Copper Cathode1 This standard is issued under the fixed designation B 115; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. 1. Scope * E 53 Methods for Chemical Analysis of Copper5 1.1 This specification establishes the requirements for elec- 3. Terminology trolytic copper cathode; electrorefined and electrowon. 1.2 Units—The values stated in inch-pound units are the 3.1 For definition of general terms related to copper and standard. The values given in parentheses are mathematical copper alloys, refer to the current editions of Classification conversions to SI units, which are provided for information B 224 and Terminology B 846. only, and are not considered the standard. 4. Ordering Information 1.3 The following hazard caveat applies to the test methods described in Annex A2 of this specification: This standard does 4.1 Orders for product shall include the following informa- not purport to address all of the safety concerns, if any, tion, as applicable: associated with its use. It is the responsibility of the user of this 4.1.1 ASTM designation and year of issue (for example, standard to establish appropriate safety and he