材料与试验协会 B36B36M-01黄铜板、薄板、带材及轧制棒材.PDFVIP

Designation: B 36/B 36M – 01 Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar1 This standard is issued under the fixed designation B 36/B 36M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope E 8 Test Methods for Tension Testing of Metallic Materials4 1.1 This specification establishes the requirements for brass E 8M Test Methods for Tension Testing of Metallic Mate- 4 plate, sheet, strip, and rolled bar of the following alloys:2 rials [Metric] Nominal Composition E 112 Test Methods for Determining Grain Size4 Copper Alloy Previously Used E 478 Test Methods for Chemical Analysis of Copper UNS No. Designation Copper, % Zinc, % Alloys5 C21000 1 95 5 3. General Requirements C22000 2 90 10 C22600 . . . 87.5 12.5 3.1 The following sections of Specification B 248 [B 248M] C23000 3 85 15 C24000 4