材料与试验协会 B48-00电导线用矩形和正方形软裸铜线.PDFVIP

Designation: B 48 – 00 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors1 This standard is issued under the fixed designation B 48; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. 1. Scope 3. Ordering Information 1.1 This specification covers soft or annealed bare copper 3.1 Orders for material to this specification shall include the wire, rectangular or square in shape with rounded corners following information: (Explanatory Note 1). 3.1.1 Quantity of each size, 1.2 For the purpose of this specification, the wire is classi- 3.1.2 Type of wire (see 1.1, 1.2, and 1.3), fied as follows: 3.1.3 Wire size: thickness and width, in inches or millime- 1.2.1 Type A—For all applications except those involving tres (see 6.1), edgewise bending. 3.1.4 Type of copper, if special (see Section 4), 1.2.2 Type B—For applications involving edgewise bend- 3.1.5 Package size (see 16.1), ing. Type B wire of thickness less than 0.020 in. (0.51 mm) or 3.1.6 Special package marking, if required, and with a ratio of width to thickness greater than 30 to 1 is not 3.1.7 Place of inspection. (see Section 15). contemplated in this spe