材料与试验协会 B90， B90M-98镁合金薄板和中厚板.PDFVIP

Designation: B 90/B 90M – 98 AMERICAN SOCIETY FOR TESTING AND MATERIALS 100 Barr Harbor Dr., West Conshohocken, PA 19428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Specification for Magnesium-Alloy Sheet and Plate1 This standard is issued under the fixed designation B 90/B 90M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope * 2.3 Federal Standards:5 1.1 This specification covers magnesium alloys in sheet and Fed. Std. No. 123 Marking for Shipment (Civil Agencies) plate form designated as shown in Table 1. Fed. Std. No. 184 Identification Marking of Aluminum, 1.2 The values stated in either inch-pound or SI units are to Magnesium and Titanium be regarded separately as standards. The SI units are shown in 2.4 Military Standards:5 brackets or in separate tables or columns. The values stated in MIL-STD-129 Marking for Shipment and Storage each system are not exact equivalents; therefore, each system MIL-M-3171 Magnesium Alloy, Processes for Pretreatment must be used independent of the other. Combining values from and Pr