材料与试验协会 B36B36M-06黄铜板、薄板、带材及轧制棒材.pdfVIP

Designation: B 36/B 36M – 06 Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar1 This standard is issued under the fixed designation B 36/B 36M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope* E 8 Test Methods for Tension Testing of Metallic Materials 1.1 This specification establishes the requirements for brass E 8M Test Methods for Tension Testing of Metallic Mate- plate, sheet, strip, and rolled bar of the following alloys:2 rials [Metric] Copper Alloy Previous Nominal Composition E 112 Test Methods for Determining Average Grain Size UNS No. Trade Name Copper, % Zinc, % E 478 Test Methods for Chemical Analysis of Copper Alloys C21000 Gilding, 95 % 95 5 C22000 Commerical Bronze, 90 % 90 10 3. General Requirements 1 C22600 Jewerly Bronze, 87 ⁄ 2 % 87.5 12.5 C23000 Red Brass, 85 % 85 15 3.1 The following sections of Specification B 248 or C24000 Low Brass, 80 % 80