材料与试验协会 B75-02 无缝铜管.PDFVIP

Designation: B 75 – 02 Standard Specification for Seamless Copper Tube1 This standard is issued under the fixed designation B 75; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope * B 193 Test Method for Resistivity of Electrical Conductor 4 2 establishes the requirements for Materials 1.1 This specification seamless round, rectangular, and square copper tube suitable B 251 Specification for General Requirements for Wrought for general engineering applications. Seamless Copper and Copper-Alloy Tube3 1.1.1 Tubes made from any of the following Copper UNS B 577 Test Methods for Detection of Cuprous Oxide (Hy- No. designations shall be supplied unless otherwise specified in drogen Embrittlement Susceptibility) in Copper3 the contract or purchase order: B 601 Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast3 Copper UNS No. Type of Copper