材料与试验协会 B80-01ｅｌ镁合金砂型铸件.PDFVIP

Designation: B 80 – 011 Standard Specification for Magnesium-Alloy Sand Castings1 This standard is issued under the fixed designation B 80; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1 NOTE—Changes were made to Table 1 editorially November 2002. 1. Scope and Magnesium Castings5 1.1 This specification covers magnesium-alloy sand cast- E 165 Test Method for Liquid Penetrant Examination Method5 ings designated as shown in Table 1. 1.2 The values stated in inch-pound units are to be regarded E 527 Practice for Numbering Metals and Alloys (UNS)6 as the standard. The SI values in parentheses are provided for E 716 Practices for Sampling Aluminum and Aluminum information only. Alloys for Spectrochemical Analysis7 2.3 Federal Standards: 2. Referenced Documents Fed. Std. No. 123 Marking for Shipment (Civil Agencies)8 2.1 The following documents of the issue in effect on date Fed. Std. No. 184 Identification Marking of Aluminum, of order acceptance form a part of th