材料与试验协会 B33-00电气用镀锡软的或退火的铜线.PDFVIP

Designation: B 33 – 00 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes1 This standard is issued under the fixed designation B 33; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope if the total of other elements, exclusive of copper, does not 1.1 This specification covers tinned, round, soft, or annealed exceed 1%. Notwithstanding the previous sentence, chemical copper wire for electrical purposes. analysis of the tin coating or of the tin used for coating shall not 1.2 The SI values for density and resistivity are to be be required under this specification. Adequacy of the tin regarded as standard. For all other properties the inch-pound coating is assured by the continuity of coating and adherence of values are to be regarded as the standard and the SI units may coating requirements (see 5.4 and 5.5, respectively). be approximate. 4.2 Copper-Base Metal—The base metal shall be copper of such quality and purity that the finished product shall have 2. Referenced Documents properties and characteristics prescribed in thi