材料与试验协会 B108-03ａ铝合金永久型模铸件.PDFVIP

Designation: B 108 – 03a Standard Specification for Aluminum-Alloy Permanent Mold Castings1 This standard is issued under the fixed designation B 108; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope* Determine Conformance with Specifications4 2 covers aluminum-alloy permanent E 34 Test Methods for Chemical Analysis of Aluminum and 1.1 This specification mold castings designated as shown in Table 1. Aluminum-Base Alloys5 1.2 This specification is not intended for aluminum-alloy E 88 Practice for Sampling Nonferrous Metals and Alloys permanent mold castings used in aerospace applications. in Cast Form for Determination of Chemical Composition5 1.3 Alloy and temper designations are in accordance with E 94 Guide for Radiographic Testing6 ANSI H35.1. The equivalent unified numbering system alloy E 155 Reference Radiographs for Examination of Alumi- designations are in accordance with Practice E 527. num and Magnesium Castings6 1.4 For acceptance criteria for inclusion of new aluminum E 165 Test Method for Liquid Penetrant Examination6 and aluminum alloys and their properties in this specification, E 527