英文参考文献原文复印件及译文.docVIP

PAGE 英文参考文献原文 专 业： 自动化 姓 名： 张学超 学 号： 120410116 指导教师： 王书强 完成日期 2016 年 4 月 PAGE 3 Integrated Substation Automation System Analysis Abstract In recent years, as computers and digital communication technology, secondary substation equipment is basically a computer-based. Computer protection, computer monitoring device in the substation have been widely used, which greatly raised the level of automation in power system reliability and operation, has achieved a lot of unmanned substations. However, due to differences in professional standards, different manufacturers used in the design of substation automation programs are not the same, thus leaving the majority of users at a loss. Substation relay protection, fault recorder, local and remote monitoring not only of different functions, and the realization of the principles and techniques are also different. Thus, the long-standing expertise in different technologies and the corresponding management departments. With the microprocessor-based protection, computer control and remote computer devices, such as widely used, it was noted that despite the different functions of these devices, the hardware configuration is the same, the collection and to control many of the same object. Thus, it appears from the overall situation to consider the idea of substation automation. However, in substation automation technologies, the implementation process of the relay, measure, control, remote features, as well as the relationship between them, are still some problems worthy of our study. Keywords: substation automation The following currently used for many domestic substation automation design practical, from the secondary system analysis and comparison of several aspects. 1 System structure The whole system level by the station management, industrial bus network layer and spacing layer is composed of three parts, the system of all moni