gb2114c泉州市天益机电84.pdfVIP

Vickers® Accessories “Soft Switch” Power Plugs EHH-AMP-702-C-2*; 10 Series For use with valve types: Features and Benefits Application KDG4V-3(S)-H7-6* KTG4V-3(S)-H7-6* Integral amplifier provides control Focus applications for this plug are in KDG4V-5-H*-3* from on/off logic command signal the control of hydraulic solenoid- KTG4V-5-H7-3* Adjustable ramp time operated directional and pressure KCG-3/6/8-H1-1* Deadband compensation control valves where control of valve KX(C)G-6/8-H1-1* Adjustable output level response time can significantly reduce KDG5V-5/7/8-H1-1* Adjustable dither shocks in the hydraulic system. CMX***-E-G EMC to latest European standards EPV**-12D-1* Improved switching time repeatability Best results in reducing hydraulic ERV1/2**-12D-1* Fully short-circuit and reverse-polarity shocks will only be obtained by using EPFR1**-12D-1* protected valves with the right “low shock”, or Protection to IP67 “proportional” features. General Description These plugs, conforming to ISO 4400/ Electrical Block Diagram DIN 43650 interface, offer adjustable, ramped on/off switching times through Power the use of an integral amplifier. input