原创力文档- 1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
- 2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
- 4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
- 5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传，每下载1次， 网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
Method for mounting solid wood floor（实木地板的安装方法）
1. make sure the ground is dry, level and free of debris. Usually, the floor shall be installed after the completion of other decoration works. The length of the floor should be aligned with the orientation of the door to ensure a good visual effect.
2. laying floors, please use standard drying, planing light, good stability of wooden keel, adjusted to the same level, the gap shall not be greater than 2 mm. If the wooden keel is uneven, will affect the effect of laying on the floor, and may thus have a certain friction sound; non load heavy floor, wooden keel on both sides do not cement, to prevent damp floor deformation; before the construction of water to check the wood keel rate must be below 16%, the new housing and the ground floor is wet the floor must be moisture-proof floor, the opposite must brush sealing primer.
The 3. floor should be placed after the completion of the final construction in other decoration projects, to prevent pollution before laying the floor; mason wall, brick must come to an end, and floor junction must be moistureproof measures, prohibited the dry and wet staggered construction!
4. in the installation of the floor must be cleaned before the ground, the ground is dry to ensure no debris; to avoid damp floor deformation, must be in the keel and the floor laying tide film; combined with floor and marble water high position must moistureproof layer.
5. correct paving method should be laid into the removable floor; please drill holes in the required tenon fixed (3mm), to prevent the floor burst, please select the appropriate length of the galvanized screws, 45 degrees nails so that in case of need to be disassembled, the floor can be intact, and the choice of common screw uninstall, floor will be severely damaged. In the walls, should leave telescopic 0.5-1.0 cm seam, laying on the floor as the site environment and wood, construction personnel can consider the use of inserts, more than 6 mete
文档评论（0）