连杆零件的机械加工工艺规程成和工艺装备设计.docVIP

此套设计有全套CAD图和卡片，有意者请联系我索取522192623@ 摘　要 本次课程设计详细阐述了对连杆端面10mm槽的专用铣床夹具设计，采用一面两销进行定位，通过综合分析和设计，验证了该设计的可行性和优越性，通过此设计，实现了理论知识和实践的充分结合，在这次课程设计涉及了机床类型的选择、加工方式的选择、刀具的选择、定位误差的分析和计算、夹具体设计应注意的问题等等。进一步添加计算机绘图的经验。 综合该次设计的全过程，体会到了设计路途的迷茫和艰难，作为学完《机械制造技术基础》之后的一项重要的实践，充分考察了我们独立设计，计算，绘图和分析的能力，尤其提高了我们查阅各种设计手册的和相关资料的能力，深刻体会了夹具设计的一般步骤和相关问题的解决办法，为将来参加工作，熟悉工艺打下坚实基础。 Abstract The curriculum design detail of the connecting rod slot dedicated 10mm Face milling fixture design, using a two-pin position, through a comprehensive analysis and design, design verification of the feasibility and advantages of this design, the realization of the theoretical knowledge and practice are fully integrated in the curriculum design involves the choice of the machine tool type, processing, selection, tool selection, location analysis and calculation error, the folder should be noted that the specific design problems, and so on. Add further experience in computer graphics. Integrated design of the whole process of design experience to the confused and difficult road, as school finished, the basis of mechanical manufacturing technology after the practice of an important and fully independent of our study design, computing, graphics and analysis capabilities, particularly to improve our access to a variety of design manuals and related information on the capacity of the fixture design should have realized the general steps and related solutions to the problems for the future work, familiar with the process to lay a solid foundation. 目 录 TOC \o 1-3 \h \z \u 1 连杆零件的机械加工工艺规程 1 1.1 连杆的工艺性分析及生产类型的确定 1 1.1.1 连杆的技术要求 1 1.1.2 审查连杆的工艺性 1 1.1.3 确定连杆的生产类型 1 1.2 机械加工工艺规程设计 2 1.2.1 选择毛坯 2 1.2.2 确定毛坯的尺寸公差和机械加工余量 2 1.2.3 绘制连杆毛坯简图 3 1.3 拟定连杆工艺路线 4 1.3.1 定位基准的选择 4 1.3.2 表面加工方法的确定 4 1.3.3 加工阶段的划分 4 1.3.4 工序的集中和分散 4 1.3.5 工序顺序的安排 5 1.3.6 确定工艺路线 5 1.4加工余量、工序尺寸和公差的确定（工序6） 5 1.5 切削用量、时间定额的计算（工序6） 6 1.5.1切削用量的计算 6 1.5.2 时间定额的计算 7 2. 相关工序夹具的设计 8 2.1 定位方案及定位误差分析 8 2