华为QuidWay交换IP机配置命令手册.docxVIP

华为QuidWay交换IP机配置命令手册 Huawei QuidWay switch configuration command manual for the huawei QuidWay switch 1, start Establish a local configurstion environment to connect the hosts serial port to the Console port of the Ethernet switch by configuring the cable? Runs on a host computer terminal emulator (such as Windows hyperterminal, etc?)，set up the terminal communication parameters for: 00 baud rate to 96 - bit/s, 8 data bits, 1 stop bit, no check and no f 1 ow control, and select for VT100 terminal types. Ethernet switch on electricity, self-inspection of Ethernet switch information displayed on the terminal, which prompt the user type in a carriage return after self-checking, then there will be a command prompt (such as Quidway〉)? Type the command, configure the Ethernet switch or view the Ethernet switch to run. Need help to type in “？〃 Command v i ew the user view (see the simple running status and statistics of the switch) Quidway : cormect with the switch to enter system view (configuration system parameter) [Quidway]: type system-view under user view the Ethernet port view (configuring the Ethernet port parameter) [quidway-ethernet0/1] : type interf in the system view Ace 0/1 Ethernet the VLAN view (configure the VLAN parameter) [quidway-vlanl] : type VLAN 1 under the system view the VLAN interface view (configuring the IP interface parameters for VLAN and VLAN) [quidway-vlan-interfacel] : in the system View the interface vlan-interface 1 under the unified view local user views (configure local user parameters) [quidway-luser-userl] : type local - user in the system view userl the user interface view (configure user interface parameters) [quidway-uiO] : type user-interface in the system v i ew Other commands Set system time and time zone Quidway clock time Beijing? Add 8 Quidway clock datetime 12:00 2005/01/23 Set the name of the switch [Quidway] sysname TRAIN - 3026-1 [TRAIN -3026-1] Configure the user to log in [Quidway] user-interface vty 0 4 [quidwa