机电一体化及数控专业英语教学课件 作者 刘晓莉 苏雪 邓青 Unit 4.pptVIP

Unit 4 Mechanical Design and Machine Parts Ⅰ.Fill in the blanks according to the text _______is the process of designing and/or selecting mechanical components and putting them together to accomplish a desired function. 2.Spur gears are cut from cylindrical blanks and their teeth have faces that are on which the gear is mounted. 3.The deep-groove bearing can stand ． 4.___can support greater thrust capacity in one direction as well as radial loads． 5.The self-aligning bearing has an outer raceway ball path ground in a spherical shape so it can ______ A..Mechanical design B. a radial load as well as some thrust load． C accommodate large amounts of angular misalignments or shaft deflections D oriented parallel to the shaft E. The angular-contact bearing Ⅱ.Choose from Column B an appropriate object for each of the words in Column A: ( ) A..bevel gear A.直齿齿轮 ( ) B.chain drive B.带轮装置 ( ) C.spur gear C.斜齿轮 ( ) D.a single-reduction D.一级减速器 ( ) E.helical gear E.锥形齿轮 ( ) F.devices-belt drive F.链轮装置 ( ) G.external gears G.齿面 ( ) H.pitch radius H.齿槽底面 ( ) I.ring gear I.齿厚 ( ) J.tooth face J.节圆半径 ( ) K.fillet radius K.外齿轮 ( ) L.bottom land L.齿根圆角半径 ( ) M.tooth thickness M.内圈齿轮 Ⅲ.True or False 1. The basic bearing consists of an inner ring，an outer ring，the balls，and the retainer． 2. An decrease in radial load capacity may be obtained by employing a double-row radial bearing. 3.The angular-contact bearing has a single -shouldered ball groove in one ring and a two-shouldered ball groove in the other ring. 4. The self-aligning bearing are designed to carry a pure axial load only. 5. Thrust bearings are designed to carry not only a pure axial load but also radial loads. 6. Spur gears are the simplest type of practical engineering-grade gear 7. The internal gears of the teeth are formed on the outside of the cylinder 8. The effective radius of a spur gear, which is also the radius of its conceptual rolling cylinder，is called the pitch radius，r. 9 To i