液压管接头样本.doc

Weathercote?– is an exclusive Weatherhead? trademark for a pro-tective coating that far exceeds the minimum requirements of the SAE specifications for a corrosion resistant finish for use with petroleum-based, synthetic, and water-based hydrau-lic fluids. It is readily identified by its 1/43/81/23/411-1/4 T eflon? is a registered trademark of DuPont. Seal-Nut for Male Pipe Threads Hex Socket Plug Square Head Plug Hex Head Plug Stainless Steel No. 3171x Available in stainless steel. 45° Street Elbow Stainless Steel No. (Ref. SAE No. 140339 Available in stainless steel. 90° Street Elbow Stainless Steel No. (Ref. SAE No. 140239 Available in stainless steel. Male Branch Tee Stainless Steel No. (Ref. SAE No. 140425 Available in stainless steel. Straight Thread O-Ring Material: Buna-N, 90 Durometer Temperature Range: Standard O-ring complies with SAE specification SAE J515 Type CH. Available in stainless steel. Female JIC 37° Swivel to Male Pipe C and L dimensions subject to change. Male Straight Thread to Female Pipe Swivel (Ref. SAE No. 140157 45° Elbow - Female Pipe Swivel to Female Pipe (Ref. SAE No. 140331 45° Elbow - Female SAE 45° Flare Swivel to Male SAE (Steel C and L dimensions subject to change. 90° Elbow Long - Female Pipe Swivel to Male Pipe C L1 90° Elbow - Male Straight Thread to Female Pipe Swivel (Ref. SAE No. Elbow - SAE 45° Female Swivel to Male SAE 45°C L1 Female Pipe Swivel Tee Female Pipe Swivel to Female Pipe Branch Tee C and L dimensions subject to change. Not for use with liquids over 212°F . L1 L C Typical Application igh pressure hydraulic, pneumatic and chemical processing. perating pressure to 6000 psi (1-1/4” and 1-1/2” maximum 4,000 psi. See thread chart. Sealing Method ace O-Ring. xcellent resistance.?Plating A ll fittings are zinc plated, except braze parts which are oil dipped. ?Used With S teel and stainless steel tubing (tub- ing for brazing must be non-coated. ?Advantages T ubing is brazed for permanent leakproof connecti