c1371-98中文版-用便携式放射仪确定接近室温材料的放射性试验方法.docVIP

C 1371 PAGE 789 Designation: C 1371 -98编号：C 1371 -98 版权?ASTM，地址：美国宾夕法尼亚州西康舍霍肯Barr Harbor Drive 100号（邮编：19428-2959） PAGE 774 Standard Test Method for Determination of Emittance of Materials Near RoomTemperature Using Portable Emissometers1用便携式放射仪确定接近室温材料的放射性试验方法 This test method is under the jurisdiction of ASTM Committee C-16 on This test method is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of Subcommittee C 16.30 on Thermal Measurements.本规范由ASTM委员会C-16隔热材料委员会管辖，并由C16.30热工测量分委会直接负责。Current edition approved November 10,1998. Published March 1999. Originally published as C 1371 - 97. Last previous edition C 1371 - 97.现行版本于1998年9月10日批准，并于1999年3月出版。最初版本为C1371-97，上一版本为C1371-97。 This standard is issued under the fixed designation C 1371; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C1371刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改。 1. Scope适用范围 This test method covers a technique for determination of the emittance of typical materials using a portable differential the rmopile emissometer. The purpose of the test method is to provide a comparative means of quantifying the emittance of opaque, highly thermally conductive materials near room temperature as a parameter in evaluating temperaturas, heat flows, and derived thermal resistances of materials.本试验方法包括使用便携式差示热电堆放射仪确定典型材料的放射性的方法。本试验方法是用于提供一种量化接近室温的不透明、高导热材料的放射性作为评定材料的温度、热流和热阻的一个参数的比较方法。 This test method does not supplant Test Method C 835, which is an absolute method for determination of total hemi-spherical emittance, or Test Method E 408, which includes two comparative methods for determination of total normal emit tance. Because of the unique constru