c936-96中文版-铺路用实心混凝土内嵌单元的标准规范.docVIP

C 936 PAGE 622 Designation: C 936 – 96编号：C 936 – 96 PAGE 621 Standard Specification forSolid Concrete Interlocking Paving Units This specification is under the jurisdiction of ASTM Committee C-27 on Precast Concrete Products and is the direct responsibility of Subcommittee C27.20 on Architectural and Structural Products.本规范由ASTM委员会 This specification is under the jurisdiction of ASTM Committee C-27 on Precast Concrete Products and is the direct responsibility of Subcommittee C27.20 on Architectural and Structural Products.本规范由ASTM委员会C-27预制混凝土制品委员会管辖，并由C27.20建筑和结构制品分委会直接负责。 Current edition approved June 10, 1996. Published August 1996. Originally published as C 936 - 82. Last previous edition C 936 - 82.现行版本于1996年6月10日批准，并于1996年8月出版。最初版本编号为C936-82，上一版本编号为C936-82。 This standard is issued under the fixed designation C 936; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 936刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope适用范围 1.1 This specification covers the requirements for interlocking concrete pavers manufactured for the construction of paved surfaces.本规范涵盖为摊铺路面施工所制造的混凝土内嵌铺路材料的要求。 1.2 When particular features are desired, such as weight classification, higher compressive strength, surface textures, finish, color, or other special features, such properties should be specified by the purchaser. Local sellers, however, should be consulted as to availability of units having the desired features.当要求如重量分类、较高抗压强度、表面纹理、饰面、颜色之类的独特特征或其他独特特征时，买方应规定上述特性。然而，具有需要特征单元的实用性应向当地卖方咨询。 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.以标准国际单位表示的数值视为标准值，圆括号内数值仅供参考。 2. Referenced Documents参考文件 2.1